Upgrading System Software; Upgrading System Software By Pc - Polycom QDX 6000 Administrator's Manual

Upgrading System Software

Upgrading System Software by PC

You can upgrade QDX 6000 software through LAN connection using a
software update package.
To upgrade the QDX 6000 software:
1
The PC used for upgrading must reside on the same network as QDX 6000 does.
2
3
4
When upgrading your system to a newer version, e.g. from V3.0 to V4.0, a dialogue
box will pop-up prompting you to enter the upgrade key.
Save the latest version of the update package you get from the
distributor or the customized update package you created to a folder on
your PC.
For information about creating customized system update package, refer
to Logo Customization.
Double-click the .exe file.
Enter the IP address of the system you want to update, and then click
Get Endpoint Information.
After the PC communicates with QDX 6000 successfully, the information
about this endpoint will be displayed. Otherwise, you may receive an
error message, indicating the network connection failure.
Click Upgrade.
After upgrading is complete, the system reboots automatically.
14
14-1