Example 11-19. Lfu Command - Compaq AlphaServer DS20E Reference Manual

11-38 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
UPD> list
Device Current Revision
Fsb 3.1-x
Nt 5.68
Pkx0 A11
Srm 5.4-x
Pua A214
UPD> update *
WARNING: updates may take several minutes to complete for each device.
Confirm update on: AlphaBIOS
AlphaBIOS Updating to V6.40-1...
Confirm update on: srmflash
srmflash Updating to V6.0-3...
UPD> exit

Example 11-19. Lfu Command

The lfu command starts the Loadable Firmware Update (LFU) Utility. The
syntax is:
lfu
NOTE: If the system has been shut down from a booted program (most
commonly, the operating system) or in some other way halted back to the SRM
console, the system must be reset before running LFU.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Filename
fsb_fw
nt_fw
kzpsa_fw
srm_fw
cipca_fw
[Y/(N)] y
DO NOT ABORT!
Verifying V6.40-1...
[Y/(N)] y
DO NOT ABORT!
Verifying V6.0-3...
Update Revision
3.x
5.xx
A11
5.4-xx
A2xx
PASSED.
PASSED.