Table 11-3 Special Characters For Srm Console - Compaq AlphaServer DS20E Reference Manual

Character
Return or Enter
Backslash (\)
Delete
Help
Ctrl/A or F14
Ctrl/B or up-arrow
Ctrl/C
left-arrow
Ctrl/E
Ctrl/F or right-arrow
Ctrl/H
Backspace
Ctrl/J
Ctrl/O
Ctrl/Q
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Table 11-3
Special Characters for SRM Console
Terminates a command line. No action is taken on a
command until it is terminated. If no characters are
entered and this key is pressed, the console just
redisplays the prompt.
Continues a command on the next line. Must be the
last character on the line to be continued.
Deletes the previous character.
By itself, displays first-level help. When pressed after
part of a command, displays options available.
Toggles between insert and overstrike modes. The
default is overstrike.
Recalls previous command or commands. The last 16
commands are stored in the recall buffer.
Terminates the process that is running. Clears Ctrl/S;
resumes output suspended by Ctrl/O. When entered as
part of a command line, deletes the current line. Ctrl/C
has no effect as part of a binary data stream.
Moves the cursor left one position.
Moves the cursor to the end of the line.
Moves the cursor right one position.
Moves the cursor to the beginning of the line.
Deletes one character
Deletes the previous word.
Stops output to the console terminal for the current
command. Toggles between enable and disable. The
output can be reenabled by other means as well: when
the console prompts for a command, issues an error
message, or enters program mode, or when Ctrl/P is
entered.
Resumes output to the console terminal that was
suspended by Ctrl/S.
Using the SRM Console 11-7
Function
continued