Compaq AlphaServer DS20E Reference Manual page 73

The sliding segment of the slide has an access hole
three mounting holes in the stationary segment. You use two of the mounting
holes.
Front
1. Insert a cap screw through the access hole
most) mounting hole
bracket. Fasten with one two-hole nut bar
2. Align the access hole with the third mounting hole
3. Insert a cap screw through the access hole and the third hole
slide and through the slot
nutbar and tighten.
Back
1. Insert a screw through the two holes
slide and through a slot in the slide bracket. Attach to a two-hole nut
.
bar
Repeat the entire procedure for the other slide.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: FR-K8F6W-UA .A01 File Name: d-ch3 Installing a Rack System.doc Last Saved On: 10/4/99 1:25 PM
Installing the Rackmount Server 3-17
and the first (forward-
in the slide and through the hole
on and tighten.
in the slide bracket. Fasten through the
in the stationary segment of the
that provides access to
in the slide
in the slide.
in the