Compaq AlphaServer DS20E Reference Manual page 131

To Run a Configuration Utility
1. From AlphaBIOS Setup, select Utilities. From the submenu that is
displayed, select Run Maintenance Program and press Enter.
2. In the Run Maintenance Program dialog box, type the name of the
program to be run in the Program Name field. Then tab to the Location
list box, and select the hard disk partition, diskette, or CD-ROM drive
from which to run the program.
3. Press Enter to execute the program.
NOTE: If you are running a utility from a diskette, you can simply type the utility's
name into the Program Name field, and press Enter. The diskette drive is the
default selection in the Location field. Use Alt+Down arrow when a list box is
selected to open the list.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: g-ch6 Using the AlphaBIOS.doc Last Saved On: 9/30/99 4:37 PM
Using the AlphaBIOS 6-11