11-34 DS20E Reference Guide
The clear password command clears the password environment variable,
setting it to zero. This command is used when you want access to all the SRM
console commands, but the system is in secure mode. In order to use clear
password, you must know the current password.
To clear the password without knowing the current password, use the login
command, with the Halt button or RMC halt command, as described in the
section on the login command.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM