Compaq AlphaServer DS20E Reference Manual page 94

4-10 DS20E Reference Guide
Loading vmunix symbol table ... [1333528 bytes]
sysconfigtab: attribute Per-proc-address-space not in subsystem proc
Alpha boot: available memory from 0x134c000 to 0x1ffee000
Tru64 UNIX V4.0F-4
physical memory = 512.00 megabytes.
available memory = 492.64 megabytes.
using 1958 buffers containing 15.29 megabytes of memory
Master cpu at slot 0.
Firmware revision: 5.4-5160
PALcode: Tru64 UNIX version 1.45-5
Compaq AlphaServer DS40E
.
.
.
Tru64 UNIX Version V4.0F
Part Number: FR-K8F6W-UA .A01 File Name: e-ch4 Operating the System.doc Last Saved On: 10/4/99 2:40 PM
(Rev. 1180); Tue Feb
Login:
Example 4-1 shows a boot from a local SCSI drive. The example is
abbreviated. For complete instructions on booting UNIX, see the Tru64 UNIX
Installation Guide.
Perform the following tasks to boot a UNIX system:
1. Power up the system. The system stops at the SRM console prompt,
P00>>>.
2. Set boot environment variables, if desired.
3. Install the boot medium.
4. Enter the show device command
drive for your device.
5. Enter the boot command
not set the associated environment variables). In Example 4-1, boot
flags have already been set.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
2 13:00:04 EST 1999
to determine the unit number of the
and command-line parameters (if you have