Compaq AlphaServer DS20E Reference Manual page 252

11-46 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Symbolic forms can be used for the address. They are:
pc The program counter. The address space is set to GPR.
The location immediately following the last location referenced in a
+
deposit or examine command. For physical and virtual memory, the
referenced location is the last location plus the size of the reference (1 for
byte, 2 for word, 4 for longword). For other address spaces, the address
is the last referenced address plus 1.
The location immediately preceding the last location referenced in a
-
deposit or examine command. Memory and other address spaces are
handled as above.
* The last location referenced in a deposit or examine command.
@ The location addressed by the last location referenced in a deposit or
examine command.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments: