Rmc Commands; Table 10-1 Rmc Command Summary - Compaq AlphaServer DS20E Reference Manual

RMC Commands

The RMC commands given in Table 10-1 are used to control and monitor a
system remotely.
halt
haltin
haltout
help
or
poweroff
poweron
quit
reset
setesc
status
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: k-ch10 Managing the System Remotely.doc Last Saved On: 10/4/99 1:33 PM
Table 10-1
RMC Command Summary
Command
Halts the system. Emulates pressing the Halt button
and immediately releasing it.
Causes a halt assertion. Emulates pressing the Halt
button and holding it in.
Terminates a halt assertion created with haltin.
Emulates releasing the Halt button after holding it in.
Displays the list of commands.
?
Turns off power. Emulates pressing the On/Off button
to the off position.
Turns on power. Emulates pressing the On/Off button
to the on position.
Exits console mode and returns to system console
port.
Resets the system. Emulates pressing the Reset
button.
Changes the escape sequence for invoking command
mode.
Displays system status and sensors.
Managing the System Remotely 10-7
Function