Compaq AlphaServer DS20E Reference Manual page 196

10-10 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: k-ch10 Managing the System Remotely.doc Last Saved On: 10/4/99 1:33 PM
poweron
The poweron command requests the RMC to power on the system. The
poweron command is equivalent to pressing the On/Off button on the control
panel to the on position. For the system power to come on, the following
conditions must be met:
AC power must be present at the power supply inputs.
The On/Off button must be in the on position.
All system interlocks must be set correctly.
The RMC exits command mode and reconnects the user's terminal to the
system console port.
RMC>poweron
Focus returned to COM port
NOTE: If the system is powered off with the On/Off button, the system will not
power up. The RMC will not override the "off" state of the On/Off button. If the
system is already powered on, the poweron command has no effect.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments: