Example 11-3. Show Device Command - Compaq AlphaServer DS20E Reference Manual

11-12 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
P00>>> show device
dkc0.0.0.9.0
dkc100.1.0.9.0
dkc200.2.0.9.0
dkc300.3.0.9.0
dkc500.5.0.9.0
dva0.0.0.0.0
ewa0.0.0.8.1
pkc0.7.0.9.0
P00>>>

Example 11-3. Show Device Command

The show device command displays status for devices and controllers in the
system: SCSI and MSCP devices, the internal floppy drive, and the network.
The syntax is:
show device
[controller_name]
controller
The controller name or abbreviation. When abbreviations
_name
or wildcards are used, all controllers that match the type
are displayed. If no name is given, the display is a list of
all devices and controllers in the system.
An example of a device name is dka200.2.0.7.1. Table 11-4 shows the
interpretation of this device name.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
DKC0 RZ1DB-BA
DKC100 RZ1CB-CA
DKC200 RZ1CB-CA
DKC300 RZ1CB-CA
DKC500
DVA0
EWA0 00-00-F8-00-0E-3B
PKC0 SCSI Bus ID 7
LYG0
LYJ0
LYJ0
LYJ0
RRD47 1337
5.54