Before You Begin Removal; To Remove The Side Panel On A Pedestal; To Replace The Side Panel On A Pedestal - Compaq AlphaServer DS20E Reference Manual

Before You Begin Removal

1. Shut down the operating system following the instructions listed in the
operating system documentation.
2. Set the On/Standby buttons on all external options connected to the
system to the off position.
3. Set the On/Standby button on the system unit to the off position.
4. Unplug the power cord.

To Remove the Side Panel on a Pedestal

5. Open the front bezel.
6. Remove the screw attaching the side panel to the chassis (see Figure
8-1).
7. Remove the panel with a rearward motion.
8. Attach antistatic wrist strap as shown in Figure 8-2.

To Replace the Side Panel on a Pedestal

Refer to Figure 8-1 and replace the side panel of the pedestal as follows:
1. Place the side panel on the chassis and align the engagement tabs.
2. Slide the panel forward.
3. Replace the screw.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: i-ch8 Installing Components.doc Last Saved On: 10/4/99 2:40 PM
Installing Components 8-3