Example 11-4. Show Memory Command; Example 11-5. Showpal Command - Compaq AlphaServer DS20E Reference Manual

11-14 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
P00>>> show memory
Array # Size
------- ----------
0 128 MB
1 128 MB
2 128 MB
3 128 MB
Total Bad Pages = 0
Total Good Memory = 512 MBytes
P00>>>

Example 11-4. Show Memory Command

The show memory command displays information about each memory bank:
slot number, size in megabytes, and the starting address. The syntax is:
show memory
P00>>> show pal
pal OpenVMS PALcode V1.31-27, Tru64 UNIX PALcode V1.27-31
P00>>>

Example 11-5. ShowPAL Command

The show pal command displays the versions of Tru64 UNIX and OpenVMS
PALcode. PALcode is the Alpha Privileged Architecture Library code, written
to support Alpha processors. It implements architecturally defined processor
behavior. The syntax is:
show pal
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Base Addr
---------
000000000
008000000
010000000
018000000