Example 11-17. Clear Password Command - Compaq AlphaServer DS20E Reference Manual

If you have forgotten the current password, clear the password as follows:
From the Local Console Terminal
1. Enter the login command:
P00>>> login
2. At the Enter Password: prompt, press the Halt button, then press
the Return key.
The password is now cleared and the console cannot be put into secure
mode unless a new password is set.
From the RMC
1. Enter the login command:
P00>>> login
2. At the
Enter Password:
At the
3. RMC>>>
command:
RMC>>> halt
RMC>>> quit
4. At the SRM console, clear the password:
P00>>> clear password
P00>>> clear password
Please enter the password:
Password successfully cleared.
P00>>>
P00>>> clear password
Please enter the password:
Console is secure
P00>>>

Example 11-17. Clear Password Command

Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
prompt, enter the RMC escape sequence.
prompt, enter the halt command and then the quit
# Password is not echoed.
# Invalid password entered.
Using the SRM Console 11-33