Connecting A Single 4-Slot Subsystem - Compaq AlphaServer DS20E Reference Manual

Connecting a Single 4-Slot Subsystem

Figure 7-10 displays the connections for a single 4-slot storage subsystem.
Perform the following procedure to connect the storage subsystem:
1. Connect the power source cable
end to the power source.
2. Connect the end of the SCSI cable
the SCSI controller.
3. Connect the other end of the SCSI cable
storage backplane.
4. Terminate the connection at J8
2
Figure 7-10. Connections for a Single 4-Slot Subsystem
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: h-ch7 Using the Storage Subsystem.doc Last Saved On: 10/4/99 11:13 AM
to J1 on the subsystem and the other
.
1
J1
Backplane
J3
J2
Using the Storage Subsystem 7-17
to one of the SCSI connectors on
to J3 (SCSI IN) on the
3
J8
J9
CAT0141