Table 10-2 Rmc Status Command Fields - Compaq AlphaServer DS20E Reference Manual

RMC>status
Firmware Rev: V2.0
Escape Sequence: ^]^]RMC
Remote Access: ENABLE
Temp (C): 26.0
RMC Power Control: ON
RMC Halt: Deasserted
External Power: ON
Server Power: ON
RMC>
Firmware Rev:
Escape Sequence:
Remote Access:
Temp (C):
RMC Power Control:
RMC Halt:
External Power:
Server Power:
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: k-ch10 Managing the System Remotely.doc Last Saved On: 10/4/99 1:33 PM
Table 10-2
RMC Status Command Fields
Item
Revision of RMC firmware.
Current escape sequence to invoke RMC.
Modem remote access state.
(ENABLE/DISABLE)
Current system temperature in degrees
Celsius.
Current state of RMC system power control.
(ON/OFF)
Asserted indicates that halt has been
asserted with the haltin command.
Deasserted indicates that halt has been
deasserted with the haltout command or
by cycling power with the On/Off button on
the control panel. The RMC Halt: field does
not report halts caused by pressing the Halt
button.
Current state of power to RMC. Always on.
Indicates whether power to the system is
on or off.
Managing the System Remotely 10-13
Description