Managing The System Remotely - Compaq AlphaServer DS20E Reference Manual

This chapter describes how to manage the system from a remote location using
the Remote Management Console (RMC). The RMC circuitry is powered
from 5 volt standby. The power is provided to the RMC circuitry as long as
the DS20E is plugged into live AC power. This is true even if the DS20E
power switch is off. You can use the RMC from a console terminal at a
remote location or from a local console terminal connected to the COM1 port.
Sections in this chapter are:
RMC overview
First-time setup
RMC commands
Using the RMC switch pack
Troubleshooting guide
Modem dialog details
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: k-ch10 Managing the System Remotely.doc Last Saved On: 10/4/99 1:33 PM

Managing the System Remotely

10
Chapter