Example 11-22. Creating A User-Defined Environment Variable - Compaq AlphaServer DS20E Reference Manual
Hide thumbs
Also See for AlphaServer DS20E:
- Technical manual (16 pages) ,
- Reference manual (280 pages) ,
- Reference manual (280 pages)
Table of Contents
Advertisement
11-42 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
P00>>> edit nvram
editing 'nvram'
0 bytes read in
*10
set mopv3_boot 1
*exit
17 bytes written out to nvram
P00>>>
Example 11-22. Creating a User-Defined Environment Variable
In Example 11-22 the nvram script is edited so that an environment variable
called "mop3_boot" is created and set to 1 on each power-up. By default,
MOP boots send four MOP V4 requests before defaulting to MOP V3. This
user-created environment variable forces the SRM console to bypass MOP V4
requests. This speeds up MOP booting on networks with MOP V3 software.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the AlphaServer DS20E and is the answer not in the manual?
Questions and answers