Example 11-15. Set Secure Command - Compaq AlphaServer DS20E Reference Manual

11-30 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
The syntax is:
set password
P00>>> set secure
Console is secure. Please login.
P00>>> b dkb0
Console is secure - parameters are not allowed.
P00>>> login
Please enter the password:
P00>>> b dkb0
(boot dkb0.0.0.3.1)
.
.
P00>>> set secure
Secure not set. Please set the password.
P00>>>

Example 11-15. Set Secure Command

The set secure command enables secure mode without requiring a restart of
the console. If the password has been set, the console will be secured and only
a small subset of commands can be performed. If a password has not been set,
you are prompted to do so.
The syntax is:
set secure
Secure Mode Functions
When the console is in secure mode, the only commands recognized are boot,
login, continue, and start.
The boot command does not accept command line parameters in secure mode.
The console boots using the environment variables stored in NVRAM
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
# In this example a password
# has been set.
# Password is not echoed.
# Password has not been set.