Compaq AlphaServer DS20E Reference Manual page 211

Table 11-1
Summary of SRM Console Commands
Command
login
more
prcache
set envar
set host
set password
set secure
show envar
show config
show cpu
show device
show memory
show pal
show power
show version
stop
test
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Using the SRM Console 11-5
continued
Function
Turns off secure mode, enabling access to all
SRM console commands during the current
session.
Displays a file one screen at a time.
Utility that initializes and displays status of the
optional PCI NVRAM device.
Sets or modifies the value of an environment
variable.
Connects to an MSCP DUP server on a DSSI
device.
Sets the console password for the first time or
changes an existing password.
Enables secure mode without requiring a restart
of the console.
Displays the state of the specified environment
variable.
Displays the configuration at the last system
initialization.
Displays the state of each processor in the
system.
Displays a list of controllers and their devices in
the system.
Displays memory module information.
Displays the version of the privileged architecture
library code (PALcode).
Displays information about the power supplies,
system fans, CPU fans, and temperature.
Displays the version of the console program.
Halts the specified processor. (Same as halt.)
Runs firmware diagnostics for the system.