Example 11-24. Examine Command - Compaq AlphaServer DS20E Reference Manual

11-44 DS20E Reference Guide
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
grp: 38 ( R7) 0000000053F761AE
grp: 40 ( R8) 0000010000000000
grp: 48 ( R9) 00000003F7800100
grp: 50 ( R10) 00000000000C7FFC
P00>>> examine pmem:400EC
pmem: 400EC A49D0078A47D0070

Example 11-24. Examine Command

deposit
The deposit command stores data in the location specified. If no options are
given with a deposit command, the system uses the options from the
preceding deposit command.
If the specified value is too large to fit in the data size listed, the console
ignores the command and issues an error response. If the data is smaller than
the data size, the higher order bits are filled with zeros. The syntax is shown
below.
examine
The examine command displays the contents of a memory location, a register,
or a device.
If no options are given with an examine command, the system uses the options
from the preceding examine command. If conflicting address space or data
sizes are specified, the console ignores the command and issues an error.
For data lengths longer than a longword, each longword of data should be
separated by a space.
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
# Examine physical memory.