Compaq AlphaServer DS20E Reference Manual page 80

3-24 DS20E Reference Guide
Part Number: FR-K8F6W-UA .A01 File Name: d-ch3 Installing a Rack System.doc Last Saved On: 10/4/99 1:25 PM
CAUTION: If you are installing a rack that does not have the interlock system,
you must ensure rack stability by installing rack stabilizing feet or by some other
means.
1. At the back of the rack, release the vertical bar
system.
2. Insert the stabilizer bracket
bar so that the actuator latch is above the stabilizer bracket.
3. Reinstall the vertical bar.
4. Secure the stabilizer bracket to the two remaining marked holes on the
right rack rail with two hex screws
5. Vertically position the actuator latch
on the system aligns with the actuator latch.
6. Rotate the actuator latch to orient it like the other actuator latches on the
vertical bar.
7. Tighten the Allen screws
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
of the interlock
and the actuator latch
. Tighten into the u-nuts.
such that the trip mechanism
on the actuator latch.
into the vertical