Booting The Operating System; Example 11-10. Boot Command - Compaq AlphaServer DS20E Reference Manual

Using the SRM Console 11-19

Booting the Operating System

The boot command is used to boot the operating system.
P00>>> b dka200
(boot dka200.2.0.7.1 -flags 0,0)
block 0 of dka200.2.0.7.1 is a valid boot block
reading 893 blocks from dka200.2.0.7.1
bootstrap code read in
base = 1fa000, image_start = 0, image_bytes = 6fa00
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OpenVMS (TM) Alpha Operating System, Version 7.1-2
%SYSINIT-I- waiting to form or join an OpenVMS Cluster
%VMScluster-I-LOADSECDB, loading the cluster security database
%EWA0, Fast(100baseTX) mode set by console
%MSCPLOAD-I-CONFIGSCAN, enabled automatic disk serving
.
.
.
The OpenVMS system is now executing the site-specific startup
commands.
.
.
.
Welcome to OpenVMS (TM) Alpha Operating System, Version 7.1-2
Username:

Example 11-10. Boot Command

Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM