Command Summary; Table 11-1 Summary Of Srm Console Commands - Compaq AlphaServer DS20E Reference Manual

11-4 DS20E Reference Guide

Command Summary

Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
The SRM console is a command line interface whose console commands
enable the user to examine and modify the system state.
Table 11-1 gives the most commonly used SRM console commands.
Table 11-2 gives the syntax for the console commands.
Table 11-3 gives special characters you can use in console mode.
Summary of SRM Console Commands
Command
boot
clear envar
clear password
continue
crash
deposit
edit
examine
halt
help
initialize
isacfg
lfu
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Table 11-1
Function
Loads and starts the operating system.
Resets an environment variable to its default
value.
Sets the password to zero.
Resumes program execution.
Forces a crash dump at the operating system
level.
Writes data to the specified address.
Invokes the console line editor on a RAM file or
on the nvram file (power-up script).
Displays the contents of a memory location,
register, or device.
Halts the specified processor. (Same as stop.)
Displays information about the specified console
command.
Resets the system to a known state.
Displays or modifies parameters for ISA devices.
Runs the Loadable Firmware Update Utility.
continued