The Boot screen shown in Figure 6-1 displays upon power-up and reset. Press
F2 on this screen to enter the setup program.
The AlphaBIOS Setup screen shown in Figure 6-2 is displayed. From this
screen you can select the tasks to perform. Use the arrow keys to select the
menu item you want and press Enter.
Note: Only the following choices are applicable for the Tru64 UNIX and OpenVMS
operating systems:
Upgrade AlphaBIOS
Utilities
About AlphaBIOS
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Network Setup...
Install Windows NT
Utilities
About AlphaBIOS...
Press ENTER to partition or format hard disks.
ESC=Exit
Figure 6-2. AlphaBIOS Setup Screen
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: g-ch6 Using the AlphaBIOS.doc Last Saved On: 9/30/99 4:37 PM
Using the AlphaBIOS 6-3
AlphaBIOS Setup
PK-0916-96
Need help?
Do you have a question about the AlphaServer DS20E and is the answer not in the manual?
Questions and answers