E-Mail Notifications Of Event Logs And Alerts - NETGEAR ProSafe Quad WAN FR538G Reference Manual

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
2. Modify any of the fields for this rule.
3. Click Reset to cancel any changes and return to the previous settings.
4. Click Apply to save your modifications. Your changes will appear in the Port Triggering
Rules table.
To check the status of the Port Triggering rules, click the Status link on the Port Triggering
screen.
Figure 4-22

E-Mail Notifications of Event Logs and Alerts

The Firewall Logs can be configured to log and then e-mail denial of access, general attack
information, and other information to a specified e-mail address. For example, your quad WAN
gigabit firewall will log security-related events such as: accepted and dropped packets on different
segments of your LAN or DMZ; denied incoming and outgoing service requests; hacker probes
and Login attempts; and other general information based on the settings you input on the Firewall
Logs & E-mail screen. In addition, if you have set up Content Filtering on the Block Sites screen
(see "Setting Block Sites (Content Filtering)" on page 4-27), a log will be generated when
someone on your network tries to access a blocked site.
You must have e-mail notification enabled to receive the logs in an e-mail message. If you don't
have e-mail notification enabled, you can view the logs on the Logs screen (see Figure 4-24 on
4-34 Firewall Protection and Content Filtering
v1.0, November 2007