Configure And Enable The Lan Traffic Meter - NETGEAR ProSAFE SRX5308 Reference Manual

Configure and Enable the LAN Traffic Meter

If your ISP charges by traffic volume over a period and you need to charge the costs to
individual accounts, or if you want to study the traffic volume that is requested or sent over a
LAN IP address over a period, activate the traffic meter for individual LAN IP addresses.

To configure and monitor traffic limits for LAN IP addresses:
1. Select Network Configuration > LAN Settings. The LAN submenu tabs display, with
the LAN Setup screen in view:
Figure 229.
2. Click the Advanced option arrow in the upper right of the LAN Setup screen. The IPv4 LAN
Advanced screen displays.
3. Click the LAN Traffic Meter tab. The LAN Traffic Meter screen displays. (The following
figure shows some examples in the LAN Traffic Meter Table.)
Figure 230.
The LAN Traffic Meter Table shows the following columns, all of which are described in
detail in the table that follows the next figure:
• LAN IP Address. The LAN IP address that is subject to the traffic meter.
• Direction. The direction for which traffic is measured.
• Limit (MB). The traffic limit in MB.
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Monitor System Access and Performance
359