Configure Multi-Home Lan Ip Addresses On The Default Vlan - NETGEAR SRX5308 Reference Manual


To configure a VLAN to have a unique MAC address:
1. Select Network Configuration > LAN Settings. The LAN submenu tabs display, with
the LAN Setup screen in view (see
2. Click the Advanced option arrow in the upper right of the LAN Setup screen. The LAN
Advanced screen displays:
Figure 32.
3. From the MAC Address for VLANs drop-down list, select Unique. (The default is Same.)
4. As an option, you can disable the broadcast of ARP packets for the default VLAN by
clearing the Enable ARP Broadcast check box. (The broadcast of ARP packets is enabled
by default for the default VLAN.)
5. Click Apply to save your settings.
Note: If you attempt to configure more than 16 VLANs while the MAC
address for VLANs is set to Unique on the LAN Advanced screen,
the MAC addresses that are assigned to each VLAN might no longer
be distinct.
Configure Multi-Home LAN IP Addresses on the Default
VLAN
If you have computers using different IP networks in the LAN (for example, 172.16.2.0 or
10.0.0.0), you can add aliases to the LAN ports and give computers on those networks
access to the Internet, but you can do so only for the default VLAN. The IP addresses that
are assigned as secondary IP addresses need to be unique and should not be assigned to
the VLAN.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 30
LAN Configuration
on page 59).
65