4.3.7 GVRP
GVRP (GARP VLAN Registration Protocol or Generic VLAN Registration Protocol) is a protocol that facilitates control of virtual
local area networks (VLANs) within a larger network
4.3.7.1 GVRP Configuration
This page allows you to configure the global GVRP configuration settings that are commonly applied to all GVRP enabled
ports. as well. as screen in
The page includes the following fields:
General Settings
Object
Enable GVRP globally
GVRP protocol timers
Max number of VLANs
Buttons
Click to refresh the page. Note that unsaved changes will be lost.
:
:
Click to undo any changes made locally and revert to previously saved values.
Figure 4-3-40
appears.
Figure 4-3-40: GVRP Configuration Page Screenshot
Description
The GVRP feature is globally enabled by setting the check mark in the checkbox named
Enable GVRP and pressing the Save button.
Join-time is a value in the range of 1-20cs, i.e. in units of one hundredth of a second. The
default value is 20cs.
Leave-time is a value in the range of 60-300cs, i.e. in units of one hundredth of a second.
The default is 60cs.
LeaveAll-time is a value in the range of 1000-5000cs, i.e. in units of one hundredth of a
second.
The default is 1000cs
When GVRP is enabled, a maximum number of VLANs supported by GVRP is specified. By
default this number is 20. This number can only be changed when GVRP is turned off.
User's Manual of WGS-5225-8P2S Series
161