Configuring Vlan Interfaces - Planet IGSW-2840 User Manual

-vlan-name -ASCII string from 1 to 32 characters.
media ethernet - Ethernet media type.
state - Keyword to be followed by the VLAN state. -active -VLAN is operational. -suspend - VLAN is suspended.
Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
no vlan vlan-id deletes the VLAN.
no vlan vlan-id name removes the VLAN name.
no vlan vlan-id state returns the VLAN to the default state (i.e., active).
You can configure up to 255 VLANs on the switch.
The switch allows 255 user-manageable VLANs. One other VLAN (VLAN ID 4093) is
reserved for switch clustering.
Example
Example
The following
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan

5.21.3 Configuring VLAN Interfaces

Command
interface vlan
switchport mode
switchport
acceptable-frame-types
switchport ingress-filtering
switchport native vlan
adds a VLAN, using VLAN ID 105 and name RD5. The VLAN is activated by default.
Function
Enters interface configuration mode for a specified VLAN
Configures VLAN membership mode for an interface
Configures frame types to be accepted by an interface
Enables ingress filtering on an interface
Configures the PVID (native VLAN) of an interface
559
User's Manual of IGSW-2840
Mode
GC
IC
IC
IC
IC