Telnet Server Enable; Telnet-Server Max-Connection - Planet SGS-6341 Series Command Manual

login:123
password:***
XGS3>

1.2.10 telnet server enable

Command:
telnet server enable
no telnet server enable
Function:
Enable the Telnet server function in the switch: the "no telnet server enable" command disables the Telnet function in
the switch.
Default:
Telnet server function is enabled by default.
Command mode:
Global Mode
Usage Guide:
This command is available in Console only. The administrator can use this command to enable or disable the Telnet
client to login to the switch.
Example:
Disable the Telnet server function in the switch.
Switch(config)#no telnet server enable

1.2.11 telnet-server max-connection

Command:
telnet-server max-connection {<max-connection-number> | default}
Function:
Configure the max connection number supported by the Telnet service of the switch.
Parameters:
<max-connection-number>: the max connection number supported by the Telnet service, ranging from 5 to 16.
The default option will restore the default configuration.
Default:
The system default value of the max connection number is 5.
Command Mode:
Global Mode
Usage Guide:
1-74
SGS-6341 Series Command Guide