Snmp User - Planet IGS-4215-16T2S User Manual

4.2.7.6 SNMP User

Configure SNMPv3 users table on this page. Each SNMPv3 user is defined by a unique name. Users must be configured with a
specific security level and assigned to a group. The SNMPv3 group restricts users to a specific read, write, and notify view. The
entry index key is User Name. The SNMPv3 User Setting screens in
The page includes the following fields:
Object
•
User Name
• Group
•
Privilege Mode
•
Authentication
Protocol
• Authentication
Password
• Encryption Protocol
Figure 4-2-29: SNMPv3 Users Configuration Page Screenshot
Description
A string identifying the user name that this entry should belong to.
The allowed string length is 1 to 16.
The SNMP Access Group. A string identifying the group name that this entry
should belong to.
Indicates the security model that this entry should belong to. Possible security
models are:

NoAuth: None authentication and none privacy.

Auth: Authentication and none privacy.

Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means
you must first ensure that the value is set correctly.
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:

None: None authentication protocol.

MD5: An optional flag to indicate that this user using MD5.
authentication protocol.

SHA: An optional flag to indicate that this user using SHA
authentication protocol.
The value of security level cannot be modified if entry already exists. That means
you must first ensure that the value is set correctly.
A string identifying the authentication pass phrase. For both MD5 and SHA
authentication protocols, the allowed string length is 8 to 16.
Indicates the privacy protocol that this entry should belong to. Possible privacy
protocol are:

None: None privacy protocol.
User's Manual of IGS-4215-16T2S
Figure 4-2-29 and Figure 4-2-30
74
appear.