4.3.5.4 SNMPv3 Users Configuration
Configure SNMPv3 users table on this page. The entry index key are Engine ID and User Name.
The SNMPv3 Users Configuration screen in
The page includes the following fields:
Object
•
Delete
•
Engine ID
•
User Name
•
Security Level
•
Authentication
Protocol
Figure 4-3-7
appears.
Figure 4-3-7 SNMPv3 Users Configuration page screenshot
Description
Check to delete the entry. It will be deleted during the next save.
A octet string identifying the engine ID that this entry should belong to. The string
must contain an even number between 10 and 64 hexadecimal digits, but
all-zeros and all-'F's are not allowed.
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is the ASCII characters from 33
to 126.
Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv: None authentication and none privacy.
•
Auth, NoPriv: Authentication and none privacy.
•
•
Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exist. That
means must first ensure that the value is set correctly.
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocol are:
•
None: None authentication protocol.
•
MD5: An optional flag to indicate that this user using MD5 authentication
protocol.
SHA: An optional flag to indicate that this user using SHA authentication
•
protocol.
The value of security level cannot be modified if entry already exist. That
means must first ensure that the value is set correctly.
User's Manual of WGSW-24040 / WGSW-24040R
72
SGSW-24040 / SGSW-24040R