Image Density Adjustment - Ricoh FT6645 Manual

COPIER INSTALLATION

2.7 IMAGE DENSITY ADJUSTMENT

The copy image density is already adjusted to the standard level at the
factory. If a customer requests to have the image density adjusted, it can be
done through the User Tool mode.
1. Enter the User Tool mode as follows:
1) Press the clear mode key.
2) Press the clear/stop key more than 3 seconds.
2. Press the "Set operation modes" key [A].
3. Press the "Next" key once [B].
[A]
3-20
C
23 April 1993
[B]