OPTICS
2. OPTICS
2.1 EXPOSURE GLASS REMOVAL
1. Turn off the main switch.
2. Remove the left scale [A] (2 shoulder screws).
3. Remove the rear scale [B] (3 screws).
4. Grasp the left edge of the exposure glass [C] and lift slightly. Slide the
other edge out from under the right glass holder [D]. Remove the
exposure glass.
NOTE: When reinstalling the exposure glass, make sure that the mark
(white: A095 copier/red: A096 copier) on the edge of the glass is
located at the rear right corner. This side is smoother and it
generates less static electricity when the RDH is used.
[A]
5-10
23 April 1993
[B]
[D]
[C]