7. Turn Roller Replacement
1.
Remove the transport unit covers. (Refer to "Transport Unit Cover
Removal.")
2.
Release the inverter motor assembly [A] from the turn roller assembly (6
screws and 6 bushings).
3.
Remove the inverter lower exit guide (2 screws).
4.
Remove the front bearing [B] (1 E-ring).
5.
Push the turn roller assembly [C] to the rear and release the guide [D].
6.
Remove the turn rollers [E] (1 E-ring and 7 pins).
drive pins.)
5-13
12 July '86
(Do not lose the