Transport Unit Cover Removal - Ricoh FT7060 Field Service Manual

12 July '86

4. Transport Unit Cover Removal

1. Open the inverter unit cover [A].
2. Remove the screw securing the inverter unit cover brace wire [B].
Then, push the rear pin [C] towards the back of the machine, and
remove the inverter unit cover.
3. Remove the transport unit upper cover [D] (4 screws).
4. Raise the transport unit and remove four screws securing the lower
cover [E].
5.
Lower the transport unit.
lifting the rear of the transport unit in the direction of the arrow [F].
Remove the lower cover (2 screws) while
5-10