Add Tie Trunks - Avaya CMC1 Installation, Upgrades And Additions

Adding or Removing Hardware
Installation
1. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2. Install a DID Trunk circuit pack in assigned carrier slot (if an additional
circuit pack is required).
3. Administer forms listed under "DID Trunk Group" in Administrator's Guide
for Avaya MultiVantage Software.

Add Tie Trunks

Requirements
Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an
assortment of international tie trunk circuit packs.
Installation
1. Determine the port assignment of the trunk from the trunk group screen.
EXAMPLE:
2. Install the tie trunk or an international tie trunk circuit pack in assigned
carrier slot (if an additional circuit pack is required).
3. For customer-owned (not leased) tie-trunk facilities (such as campus
environments), tie trunk circuit packs provide signaling capabilities beyond
those specified by the industry-wide E&M standard. Use
page 5-29
format, set switches on the circuit pack, and administer the port.
4. Administer forms listed under "Tie Trunk Group" in the Administrator's
Guide for Avaya MultiVantage Software.
5-28
Issue 5 October 2002
3
Cabinet (Port Carrier
Network)
3
Cabinet (Port Carrier
Network)
and Table 5-5 on page 5-29
A 07
Slot
Number
A 07
Slot
Number
to choose the preferred signaling
01
Port
Number
01
Port
Number
Figure 5-1 on
555-233-118