Snmp Interface Traps - Patton electronics SmartNode Series Software Configuration Manual

Software for smartnode series
Hide thumbs Also See for SmartNode Series:
Table of Contents

Advertisement

SmartWare Software Configuration Guide
linkUp TRAP-TYPE
ENTERPRISE snmp
VARIABLES
{ ifIndex }
DESCRIPTION
"A linkUp trap signifies that the sending protocol entity recognizes that one of the
communication links represented in the agent's configuration has come up."
::= 3
Note
The linkUp trap is not sent if any of the ISDN ports has come up.
authenticationFailure TRAP-TYPE
ENTERPRISE snmp
DESCRIPTION
"An authenticationFailure trap signifies that the sending protocol entity is the
addressee of a protocol message that is not properly authenticated. While implemen-
tations of the SNMP must be capable of generating this trap, they must also be capa-
ble of suppressing the emission of such traps via an implementation-specific
mechanism."
::= 4
Note
The authenticationFailure trap is sent after trying to access any MIB object
with a SNMP community string, which does not correspond to the system
setting.
coldStart TRAP-TYPE
ENTERPRISE snmp
DESCRIPTION
"A coldStart trap signifies that the sending protocol entity is reinitializing
itself such that the agent's configuration or the protocol entity implementation may
be altered."
::= 0
Note
The standard SNMP version 1 trap coldStart as listed below is not sup-
ported. After powering up, a warmStart trap message is sent if any trap target
host is defined.

SNMP interface traps

The SmartNode sends Interface Traps (linkUp, linkDown) when the status of logical or physical interfaces
change. Logical interfaces are interfaces defined in the IP context and CS context. Physical interfaces are ports.
The SmartNode adds an entry to event log for each Interface Traps it sends:
node(cfg)#show log
...
2002-09-06T14:54:35 : LOGINFO
2002-09-06T14:54:35 : LOGINFO
2002-09-06T14:54:35 : LOGINFO
2002-09-06T14:54:38 : LOGINFO
2002-09-06T14:54:38 : LOGINFO

SNMP interface traps

: Link up on interface h323_60.
: Link up on interface h323_30.
: Link up on interface isdn20.
: Link up on interface ETH00.
: Link up on interface ETH01.
25 • SNMP configuration
278

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartware release 5.1

Table of Contents