Upgrading The Software Directly - Patton electronics SmartNode Series Software Configuration Manual

Software for smartnode series
Hide thumbs Also See for SmartNode Series:
Table of Contents

Advertisement

SmartWare Software Configuration Guide
After the successful download, either issue the
software) or restart the H.323 gateway, thus enabling calls again (with the current software):
node(gw-h323)[h323]#no shutdown

Upgrading the software directly

It is possible to upgrade the software directly by passing the name of the delivered zip-file to the CLI command
"copy". The SmartWare downloads the whole ZIP file. During this time the download progress is displayed in
bytes. After downloading, the ZIP file containing batch file "bw" or "b" will be extracted and executed. This
leads to writing the SmartWare image, which is also part of the ZIP file, to the flash. The web pages are
updated too. After writing the image to the flash, the Smartware needs to be reloaded with the command
reload.
Mode: enable
Step
1
node(cfg)# copy tftp://<server-ip-address>/
<path>/<smartwaredeliveryfile>.zip :flash
Example: An example of such a Smartware upgrade session, where the new software is in the file
SN1000_SIP_R3.T_2006-08-10.zip which is stored on a tftp-server with the ip address 192.186.22.44:
node#copy tftp://192.186.22.44/SN1000_SIP_R3.T_2006-08-10.zip flash:
Download...
3124510 Bytes
Downloading image...completed (2715796 bytes)
Erasing flash...completed.
Writing to flash...completed
Processing files...completed
node#reload
System image handling task list
reload
Command
command (in order to start the IPNode with the new
Downloads the specified delivery file from
the TFTP server and starts the driver soft-
ware image upgrade process.
5 • System image handling
Purpose
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartware release 5.1

Table of Contents