Authentication Outbound Face - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
An alias is an alternative way to express the user-part of an identity. An alias is never used to build a sip-uri and
will never be used in communication with another device. The alias is used for comparing or matching the
identity with a sip-uri received from an external device.
Mode: Identity
Step
1 [node](identity)[name]# [no] alias name
<alias>
The huge amount of possible configuration parameters has been separated into different configuration enti-
ties–the faces. The faces refer to authentication, registration and call. Each face works in two directions–out-
bound and inbound. Outbound faces refer to to requests originating from your identity. Inbound faces refer to
requests destined to your identity.
• Authentication outbound face (see
• Authentication inbound face (see
• Registration outbound face (see
• Registration inbound face (see
• Call outbound face (see
• Call inbound face (see

Authentication outbound face

The authentication outbound face is used to provide authentication credentials to challenges from other user
agents or proxies.
Mode: Identity
Step
1 [node](identity)# [no] authentication out-
bound
An authentication entry establishes a link between an identity and exactly one pair of credentials in an authen-
tication-service. To link multiple credentials to an identity, there must be one authentication entry in the
authentication outbound face for each pair of credentials to link. The parameter username selects the entry in
the authentication-service to use. The parameter username can be omitted if and only if the name of the iden-
tity matches exactly the username in the authentication-service.
Location Service configuration task list
Command
page 605)
page 606)
page 608)
page 610)
page 611)
page 612)
Command
Purpose
Adds a new alias to the identity. The no form of the
command removes an existing alias.
Purpose
Adds a new face to the identity. The no form of the
command removes an existing face with all content
in it.
51 • Location Service
605