Configuring Hdlc Encapsulation; Pri Debugging - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Configuring HDLC Encapsulation
The hdlc encapsulation command specifies what kinds of upper layer data are contained in the hdlc frames.
Two encapsulation types are available, framerelay and ppp. For more details see Chapter 15,
figuration" on page 175 and Chapter 30,
Mode: hdlc
Step
1 [name] (hdlc)#encapsulation {framere-
lay | ppp}

PRI Debugging

For the investigation of possible problems in link establishment, data transmission or synchronization, there
exists a debug command with the options 'event' and 'error'. The command has a hierarchical characteristic
and can be applied to all ports of given type on the whole device, or to all ports of slot or just to one specific
port.
PRI port configuration task list
"PPP configuration"
Command
on page 311.
Purpose
Specifies the encapsulation type of hdlc.
Default: no encapsulation
16 • PRI port configuration
"Frame Relay con-
198