Soft Phone Client Gateway - Patton electronics SmartNode Series Software Configuration Manual

Software for smartnode series

Hide thumbs Also See for SmartNode Series:

Table of Contents

SmartWare Software Configuration Guide

Error Correction:

Dejitter Max Delay:

Max. Bit Rate:

Mute Encoder:

Payload Type NTE:

Description:

3. Create VoIP proﬁle and give it a name. All settings have default values

4., 5. Remove the default codecs G.711alaw and G.711uLaw

6. Add codec g729 with silence-suppression enabled

7. Allow the dejitter buffer to compensate 100 milliseconds of network jitter.

8. Enable fax relay over T.38 protocol

9. Limit the maximum bit rate the fax devices can communicate with each other to 9600 kbps

10. Show the conﬁgured proﬁle.

Soft phone client gateway

A soft phone client can only use G.711uLaw or G.723 codes, neither of which can use silence suppression,

DTMF relay, or fax.

1 node>enable

2 node#configure

3 node(cfg)#profile voip softPhone

4 node(pf-voip)[softPho~]#no codec g711aLaw64k

5 node(pf-voip)[softPho~]#codec g723-6k3 tx-length 30 rx-length 30 no-silence-sup-

6 node(pf-voip)[softPho~]#no dtmf-relay

7 node(pf-voip)[softPho]]#show profile voip softPhone

VoIP Profile: softPhone

=======================

47 • VoIP profile configuration

by 0 module(s)

Smartware release 5.1