Troubleshooting - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
permit 4 ip any 10.0.0.0 0.255.255.255 ipsec-policy VPN
permit 5 ip any any
profile ipsec-transform IPSEC_3DES_192
esp-encryption 3des-cbc 192
profile isakmp-transform ISAKMP_3DES_192
encryption 3des-cbc 192
authentication-algorithm sha1
profile ipsec-policy-isakmp VPN
authentication-method pre-shared-key sdfkl@hgdslkfs/iuçkfld$gus+ghf
mode tunnel
peer 1.2.3.4
diffie-hellman-group group2
use profile ipsec-transform 1 IPSEC_3DES_192
use profile isakmp-transform 1 ISAKMP_3DES_192
context ip
interface WAN
use profile acl WAN_Out out

Troubleshooting

To analyze configuration or networking problems related to IKE, the IKE module contains the following
debug monitors which log important information about the exchanged ISAKMP messages:
debug ike event
• This monitor prints every ISAKMP message sent or received as well as the current state of the ISAKMP
main and quick modes.
debug ike error
• This monitor prints information about errors detected during the ISAKMP exchange.
Key management (IKE)
32 • VPN configuration
372