Get Debug Output From The Dhcp-Server - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide

Get debug output from the DHCP-server

This procedure describes how to enable/disable the DHCP-server debug monitor
Mode: Any
Step Command
1 node(cfg) #[no] debug dhcp-server Enables/disables the debug monitor of the DHCP-server
Example: Enable DHCP debug monitor
This example shows how to enable the DHCP-server debug monitor. The debug output shows an activation of
the DHCP-server, a DHCP-client requesting a lease, and a DHCP-client releasing a lease.
node(ctx-ip)[router]#debug dhcp-server
21:40:29 DHCPS > New network 'LAN' created
21:41:29 DHCPS > Discover from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:41:29 DHCPS > Offering this hosts existing lease 192.168.1.32
21:41:29 DHCPS > Sending DHCP OFFER to 192.168.1.32 via 255.255.255.255 (68)
21:41:29 DHCPS > Deferring save of lease database
21:41:29 DHCPS >
21:41:29 DHCPS > Request from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:41:29 DHCPS > Offer 192.168.1.32 has been selected
21:41:29 DHCPS > Sending DHCP ACK to 192.168.1.32 via 255.255.255.255 (68)
21:41:29 DHCPS > Deferring save of lease database
21:41:29 DHCPS >
21:44:37 DHCPS > Release from ethernet:00.10.A4.7C.7A.F8, client
id:01.00.10.A4.7C.7A.F8 via 192.168.1.1
21:44:37 DHCPS > Lease 192.168.1.32 released
21:44:37 DHCPS > Deferring save of lease database
21:44:37 DHCPS >
DHCP-server configuration tasks
Last saved at 2002-12-04T21:40:29, next at 2002-12-04T21:55:29
Last saved at 2002-12-04T21:40:29, next at 2002-12-04T21:55:29
Last saved at 2002-12-04T21:40:29, next at 2002-12-04T21:55:29
27 • DHCP configuration
Purpose
299