Deleting Complex Functions - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Mode: Context CS
Step Command
node(ctx-cs)[switch]#complex-
1
function function-name
2 node(func)[function-name]#execute
function
or
node(func)[function-name]#execute
index function
3
Example: Create a complex function
node(cfg)#context cs
node(ctx-cs)[switch]#complex function CARRIER-TO-LOCAL
node(func)[CARRIER~]#execute 1 TRUNCATE-3-CNPN
node(func)[CARRIER~]#execute 2 DDI-TO-PISN

Deleting complex functions

To remove individual complex functions you can use the
natively you can remove specific entries of a complex function by entering the complex function configuration
mode and use the form of the
no
Procedure: To delete an entry from a complex function
Mode: Context CS
Step Command
node(ctx-cs)[switch]#complex-
1
function function-name
node(func)[table-name]#no execute
2
index
3
Example: Remove entries from a complex function
The running-config shows the following complex function:
complex function MY-FUNC
execute 1 MAP1
execute 2 MAP2
execute 3 MAP3
execute 4 MAP4
Call router configuration task list
Create a complex function function-name.
Add or inserts an entry to the complex function. function can
be another complex function or a mapping table that shall be
executed.
Note: Unlike routing and mapping tables, complex functions
are ordered lists of entries, which means that the entries are
executed in the order of appearance. You can optionally
specify an index of where to insert the function.
Repeat step 2 to add lines for additional functions to execute.
no
command.
execute
Enter the complex function from which you want to remove
an entry.
Remove the entry with the specified index.
Repeat Step 2 to remove additional entries.
40 • Call router configuration
Purpose
form of the
complex function
Purpose
command. Alter-
486