Patton electronics SmartNode Series Software Configuration Manual page 640

SmartWare Software Configuration Guide
Term or Definition
Startup Configuration
Switching Engine
System Image
System Memory
system:
TFTP Server
tftp:
SmartWare architecture terms and definitions
The startup configuration is stored in the persistent memory (nvram:) and is
always copied for execution to the running configuration in the volatile
memory (system:) after a system start-up.
Part of the SmartNode hardware which allows software controlled circuit
switching of circuit ports.
A collective term for application images and interface card driver soft-
ware, excluding configuration files.
The volatile memory, that includes the system: region, holding the running-
config for the SmartWare during operation of a SmartNode.
A region in the volatile memory of a SmartNode. See also system mem-
ory.
A central server used for configuration up- and download, download of
application and interface card driver software, that is accessed using
TFTP.
Identification of a remote storing location used for configuration up- and
download, download of application and interface card driver software,
that is accessed using TFTP.
A • Terms and definitions
Meaning
640