Patton electronics SmartNode Series Software Configuration Manual page 478

SmartWare Software Configuration Guide
Type
called-name
calling-name
name
called-ip
calling-ip
ip
calling-pi
calling-si
itc
time
date
day-of-week
Besides the header (name, input and output-type) a mapping table contains multiple entries. Each entry speci-
fies a specific value of the routing table input-type and a value that shall be applied to the call property specified
with the output-type of the table. When a call arrives a mapping table, the following procedure is applied:
1. Examine the call property as specified with the mapping table input-type.
2. Select the best matching entry. This means that the key of each of the entries is compared to the call prop-
erty and the entry that matches best is chosen.
3. Execute the entry. This means replacing the property specified with the output-type of the mapping table
with the value of the selected entry.
Call router configuration task list
Table 20. Mapping table types (Continued)
Description Input-Type
Selects an entry based on the display name
of the called party.
Selects an entry based on the display name
of the calling party.
If the output-type is also a generic kind of
property, this mapping table is applied to
both, this calling-name and the called-
name.
Selects an entry based on the remote sig-
naling IP address of the destination VoIP
peer.
Selects an entry based on the remote sig-
naling IP address of the origination VoIP
peer.
If the output-type is also a generic kind of
property, this mapping table is applied to
both, this calling-ip and the called-ip.
Selects an entry based on the presentation
indicator.
Selects an entry based on the screening
indicator.
Selects an entry based on the information
transfer capability (bearer capability) to
distinguish speech from data calls.
Route calls based on the current time of
day.
Route calls based on the current date.
Route calls based on the current day of
week.
40 • Call router configuration
Description Output-Type
Sets the display name of the called
party.
Sets the display name of the calling
party.
If the input-type is also a generic kind of
property, this mapping table is applied
to both, the calling-name and the called-
name property.
Sets the remote IP address of the destina-
tion VoIP peer.
Sets the remote IP address of the origina-
tion VoIP peer.
If the input-type is also a generic kind of
property, this mapping table is applied
to both, the calling-ip and the called-ip
property.
Sets the presentation indicator.
Sets the screening indicator.
Sets the information transfer capability.
Cannot be set.
Cannot be set.
Cannot be set.
478