Patton electronics SmartNode Series Software Configuration Manual page 607

SmartWare Software Configuration Guide
Mode: Authentication inbound
Step
1 [node](authin)#authenticate authentica-
tion-service <authentication-service> [user-
name <username>]
or
[node](authin)#authenticate <index>
authentication-service <authentication-ser-
vice> [username <username>]
or
[node](authin)#authenticate before
<index> authentication-service <authentica-
tion-service> [username <username>]
or
[node](authin)#authenticate after <index>
authentication-service <authentication-ser-
vice> [username <username>]
Mode: Authentication inbound
Step
1 [node](authin)#no authenticate [<index>]
Mode: Authentication inbound
Step
1 [node](authin)#authenticate none
Location Service configuration task list
Command
Command
Command
Purpose
Adds a new authentication entry to the authentica-
tion inbound face. If more than one authentication
entry has to be entered, the order of the list can be
modified by using the index and/or the insert key-
words before and after.
Purpose
Removes the authentication entry at the index or
removes all authentication entries if no index is
given.
Purpose
Removes all authentication entries and disables
explicitly authentication inbound.
51 • Location Service
607