Enabling The Fastconnect Procedure; Enabling The Early H.245 Procedure - Patton electronics SmartNode Series Software Configuration Manual

SmartWare Software Configuration Guide
Mode: Gateway H.323
Step
1
node(gw-h323)[h323]#h245-tunneling
Example: Enabling H.245 tunneling
The following example shows how to enable H.245 tunneling on an already defined H.323 Gateway.
node(cfg)#gateway h323 h323
node(gw-h323)[h323]#h245-tunneling]

Enabling the fastconnect procedure

If the fastconnect procedure is enabled, no separate H.245 connection is opened and all media channel specific
messages are carried within the H.225 call signaling connection. Fastconnect is disabled by default. If enabled,
it only takes place when both parties agree. Fastconnect can be enabled using the following procedure:
Mode: Gateway H.323
Step
1
node(gw-h323)[h323]#faststart
Example: Enabling fastconnect
The following example shows how to enable the fastconnect procedure on an already defined H.323 Gateway.
node(cfg)#gateway h323 h323
node(gw-h323)[h323]#faststart

Enabling the early H.245 procedure

If the early H.245 procedure is enabled, the H.245 connection is opened as soon as possible instead of waiting
for the call signaling connect message. Early H.245 is disabled by default. If enabled, it only takes place when
both parties agree. The early H.245 procedure can be enabled using the following procedure:
Mode: Gateway H.323
Step
1
node(gw-h323)[h323]#early-h245
Example: Enabling early H.245
The following example shows how to enable early H.245 on an already defined H.323 Gateway.
node(cfg)#gateway h323 h323
node(gw-h323)[h323]#early-h245
Gateway configuration task list
Command
Command
Command
45 • H.323 gateway configuration
Purpose
Enables H.245 tunneling.
Purpose
Enables the fastconnect procedure.
Purpose
Enables the early H.245 procedure.
550